Quick
TIPS
USER CONTROLS
PRODUCT AVAILABILITY:
Synergy Devices with User Controls
Launch
Inspire X
, then connect hearing devices. Refer to the
Initial Fit
Protocol QuickTIPs
for information on getting started.
The User Control Configuration demo box will appear upon first fit. Select
Show Demo
for demonstration of user control configuration options,
or select
Don't Show Again
and
Close.
Select
User Controls
on the left
navigation bar to adjust user controls during subsequent programming.
USER CONTROL CONFIGURATION
1.
Drag any
user control
you wish to enable from the left and drop it on
a
gesture
on the right. User control options include:
» Volume
» Memory
» Tinnitus
» Mute
» Balance Control (Muse iQ and Muse BiCROS devices only)
NOTE: An alert icon will appear if the tinnitus user control is enabled
but the tinnitus stimulus is disabled. Refer to the
Tinnitus QuickTIP
for additional information.
Select
gesture functionality.
If fitting a device with a push button,
default gesture options include:
» Right increase, left decrease
» Right increase and decrease
» Left increase and decrease
»Sprinkler decrease
NOTE: Select
Preferences
, then
General
to display additional user
control options, if desired.
VOLUME CONTROL RANGE AND STEP SIZE
1.
Select
VC Range and Step Size
, if volume control is enabled.
2.
Select
pins
to adjust VC Range.
3.
Select
Step Size
of 2dB or 4dB.
NOTE:
Inspire software will not allow for adjustments to VC Range
and Step Size if volume control is not enabled in User Control
Settings.
User Controls
VC Range and Step Size