Starke Arvid AB Tel: +46 522 - 22 000 Fax: +46 522 - 22 344
Lyckåsvägen 3
www.starkearvid.se [email protected]e
SE-459 30 Ljungskile
Sida
11
av
25
Charging the battery
Check the device for any externally recognisable damages or flaws.
Compare the connection on the power supply network and check the voltage, current and
mechanical connection (plug connection) with the necessary data for the vacuum pumps.
If they do not correspond, the machine may not be operated.
Connect the
Vakuflex 280
to the supply network (9) using an extension cable.
The charging procedure can be checked in voltage display (12).
The battery is charged after a maximum of 12 hours.
Remove the extension cable from the supply network.
This completes the charging procedure.
Note!
-
Once the work has been finished, switch off the device with the green button (3).
In case the battery is completely discharged, the machine cannot be used.
i
3
9
12
