Your HubStation HD comes with in-built cable modem (DOCSIS 2.0). Enjoy free internet
surfing
^
with download speed of up to 1Mbps (1000kbps) and upload speed of up to
256kbps* by plugging your HubStation HD to your computer. Alternatively, you may upgrade
to any of the MaxOnline Postpaid Plan
~
with HubStation HD. For more information on
MaxOnline Subscription plan, visit www.starhub.com/maxonline. Please refer to the
Installation Guide section for the connection diagram.
^
Free 1Mbps Broadband Internet Access valid till 31 December 2011.
~HubStation HD can only support download speeds of up to 32Mbps. Active StarHub TV subscription is required for upgrade
of MaxOnline subscription plan on HubStation HD.
*Actual bandwidth is dependent on hardware, software, internet traffic and destination server.
Voice Solutions
HubStation HD supports the following Digital Voice services with its in-built cable modem
(DOCSIS 2.0):
Digital Voice Home
Digital Voice is StarHub's Voice-Over-IP (VoIP) service available to our residential customers. If you
are currently already enjoying Digital Voice Home, you can use the service together with
HubStation HD's complimentary broadband access or any of the MaxOnline Postpaid Plan on
HubStation HD.
To do so, simply connect the wireless Integrated Access Device
#
(IAD) to the HubStation HD.
Please refer to the
Installation Guide section for the connection diagram.
For more information on Digital Voice, visit www.starhub.com/voice
#
Wireless
Integrated Access Device (IAD) is required for Digital Voice Home service.
Guide To Interactive Applications
Internet Surfing
58
010810
IMPORTANT
• For this connection, your HD-ready TV must have input for Component Video (Y-Pb-Pr)
and Composite Audio (stereo AV)
• To use Teletext, please use the TV remote control to switch your TV video source input
selection to an AV channel before pressing the Teletext button on the TV remote control to
display Teletext.
Viewing Procedure
1) Switch your TV to the Component channel to watch your programmes.
2) Select the desired channel using the remote control of your HubStation HD.
Note: On some HD-ready TV models, you may experience a problem displaying video output on 576i resolution.
If you see black screen on TV, please continue to press the
HEX button on your remote control to change the output
resolution to the next higher value.
Should you decide to connect your HubStation HD using any of the advanced options 2-4, you may need to purchase cables
like
HDMI (High Definition Multimedia Interface) and Digital Audio (SPDIF) separately as they are not provided together
with the HubStation HD.
Option 1: Connection via Component Video & Composite Audio (basic set-up)
Technical Information
Installation Guide
59
HubStation HD (Back)
HDMI/DVI
HDMI/DVI
TV
(Back)
RF IN
Component
Component
R
Red
L
White
Video
Video
STEREO AUDIO
STEREO AUDIO
Video
Yellow
Video
Yellow
L
White
R
Red
Audio
Audio
Y
Green
Pb
Blue
Video
Video
Pr
Red
5
3
2
4
DC from
Power
Adapter
Composite Audio out to
TV Component (Y-Pb-Pr)
group audio input.
Composite Video out to a
separate TV AV video input
for Teletext (optional).
To TV Component
(Y-Pb-Pr) input
StarHub
CableTV point
Connect RF cable
from the cable TV point
to the HubStation HD
Cable In.
1
TV
(Back)
RF IN
Component
Y
Green
Pb
Blue
Video
Pr
Red
R
Red
L
White
Video
STEREO AUDIO
Video
Yellow
Video
Yellow
L
White
R
Red
Audio
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
TV OUT
CABLE IN
ETHERNET2
INTERNET
ETHERNET1
OPTICAL
AUDIO
Y
Pr
Pb
R
L
VIDEO
AUDIO
R
L
R
L
VIDEO
VCR AUDIO
VIDEO
TV AUDIO
12V 2A
COMPONENT VIDEO
NOTICE:ANY TAMPERING,
UNAUTHORIZED MODIFICATION
OR INSTALLATION OF THIS
DEVICE MAY SUBJECT YOU TO
CIVIL OR CRIMINAL PENALTIES.
010211