StarForm Swift-G OI-G1480, User Manual, Page: 12 / 84

3.1.2 Installation
Use the StarStreamSwiftSetup.exe available from
https://www.
odos-imaging.com/downloads
to install.
3.2 SwiftCapture
Figure 3.2: SwiftCapture
The SwiftCapture application is a demonstration command line
control and image streaming application for the StarForm TM Swift-
G 3D camera. It can save images to file and set or query any
supported GenICam
TM features as described in chapter 8.
Online help is available using the
--help
command line option and
the
help
command when in
--interactive
mode.
3.2.1 Supported Platforms
The SwiftCapture application is available for Windows 7 and higher
and recent Linux distributions (i686 and x86 64).
4 of 76