Kylos and Kylos Compact Users Guide
www.starcomgpsglobal.com
41
If you are planning to configure other units with the same parameters, you
can save these settings as a *.mem file. Click the
Save
button
in
the Tetis Parameters window, select the location where you want the
configuration file to be saved on your computer, name the file and press
Save
.
Configuring a new unit with the saved configuration
To configure a new unit with the saved parameters, click the
Load
button
in the Tetis Parameters window, browse to the location where you
saved the configuration file, select the file and press
Open
. Click the
Select
All
button
to select all the parameters and press the
Send
button
to send the changes to the unit.
