Kylos and Kylos Compact Users Guide
www.starcomgpsglobal.com
37
This tab allows you to configure the intervals of regular tracking
transmissions, which define how often the unit will transmit its status.
Transmission
– interval of regular tracking transmissions, which defines
how often the unit will transmit its status.
GPS Peek
– interval of the GPS update, which defines how often the unit’s
GPS module will update its location.
Logging
– interval of data logging, during which the unit will wake up only
for a few seconds to record its current state, but will not transmit (useful for
temperature/humidity/light logging). The information will be transmitted
along with the next transmission (tracking/opening/etc.).
Transmission and GPS Peek values are usually left the same. In some
instances, these parameters can be configured with different values. For
example:
GPS Peek can be
faster
than Transmission when between the regular
transmissions the unit can enter or exit a specified perimeter. In such case,
a Perimeter event created on Starcom Online will be triggered by the change
in the unit location. For more information, see
Chapter 7 – Monitoring
. 32
