– 47 –
11-4. Ethernet Interface Model
ON
ON
OFF
OFF
DIP-SW 1
Switch
Function
ON
OFF
1-1
Command emulation (Ster Line mode)
Always ON
1-2
Should not be changed (Should be set to on)
1-3
Should not be changed (Should be set to on)
1-4
Sensor adjustment
Invalid
Valid
1-5
Should not be changed (Should be set to on)
1-6
Handshaking conditions (conditions for
BUSY)
Offline or receive
buffer full
Receive buffer full
1-7
Should not be changed (Should be set to on)
1-8
Should not be changed (Should be set to on)
1-9
Low-power consumption mode
Invalid
Valid
1-10
Should not be changed (Should be set to on)
The factory settings of DIP switch are all on.
DIP-SW 2
Switch
Function
ON
OFF
2-1~2-4
Always ON
Should be set to on
The factory settings of DIP switch are all on.
No. 1 2 3 4 5 6 7 8
No. 1 2 3 4
9 10
DIP-SW 1
DIP-SW 2
