Star Trac StairMaster Core Health & Fitness 15" Capacitive Touch OpenHub, Owner'S Manual

Page: 66 / 72

Page 65
1.
Use a #2 phillips screwdriver to remove the screw
securing the headphone PCB to the USB-HDMI panel,
then remove the headphone PCB.
2. Install the headphone PCB into the hotbar insert
using the screw removed in the previous step.
NOTE: Ensure that the headphone PCB is installed
into the hotbar insert that matches the correct
generation of hotbar present on the unit.
3. For 8-G (9-5250) Only:
Install the Gen 1 Audio Insert
a. Use a #2 phillips screwdriver to re-
move the screw securing the hotbar
cap into the hotbar, then remove the
cap.
8-G ONLY