– 18 –
8.2 Using the Accessories (Weight Shaft and Loop Guide)
•
Paper thickness: Min. 0.065 to Max. 0.10 mm. (See Figure 8-2)
1)
No shaft is used so fasten the 3 hooks in the 3 positions on the rear guide so that they do not get lost.
2)
Fasten the loop cutter to the cutter with the 2 accessory screws.
1. Position the loop guide and cutter in positioners
1
and
2
.
2. Tighten the screw next to the positioner
1
.
3. While pulling the next loop guide in the direction of the arrow, tighten the screw next to the
positioner
2
so that it does not flow therebetween the cutter (see Fig. 8-3)
1
2
3
Paper Holder
Cutter
Loop Guide
Rear Guide
Hook
Hook
Hook
Shaft
Screw TAT 3-6 CT-FL
Screw TAT 3-6 CT-FL
Positioner
2
Positioner
1
Figure 8-2