Star Micronics MG-S Series, Operation Manual, Page: 40 / 114

3 Functions related to the operation MG-S series operation manual
－
30
－
3-4 Multiplied by Coefficient mode
Measured weight is multiplied by the preset coefficient, and the result be displayed.
This mode is not available for verified balance.
1
Select the Multiplied by Coefficient mode.
Push [Menu] key, then push [F1-F4]
keys to go to <11 MODE>.
Push [F4] key to change the setting
value.
Push [F1/F2] key to select.
MULT ： Multiplied by Coefficient mode
Push [F4] key to fix.
2
Exit the setting menu.
Push [Menu] key to shift to the
Multiplied by Coefficient mode.
3
Select whether or not employ the previous
recorded coefficient.
Push [F3/F4] key to select whether or
not employ the previous data.
When there is no data record, this step is
skipped.
Push [F3/F4] key to select.
NO : Change
YES : Not Change
When <YES> is selected, go to step 6.
4
Set the coefficient.
Numeric value input
(Refer to “2-5-3 Numeric value input”)
Input the coefficient.
Push [F4] key to fix.
5
Weigh the samples.
The weight of the sample is multiplied by the
coefficient and the result is displayed.