Star Micronics MG-S Series, Operation Manual, Page: 37 / 114

MG-S series operation manual 3 Functions related to the operation
－
27
－
3-3 Percentage mode
The weight of a sample to be weighed is indicated in percent relative to the reference weight.
There are two methods to input the reference weight;
- Actual value setting method ([onW]): Place the reference weight on the balance to record the
weight.
- Numeric value setting method ([NUM]): Input numeric value of the reference weight by key
operation.
(1) Weight limit.
Models d (g) Weight limit (g)
MG-S322 0.01 0.10
MG-S1501 0.1 1.0
MG-S8200 1 10
(2) The minimum percent to be displayed is automatically set according to the recorded reference
weight.
Readability (%) Range of reference weight
1 Lower weight limit <= Reference weight < Lower weight limit X 10
0.1 Lower weight limit X 10 <= Reference weight < Lower weight limit X 100
0.01 Lower weight limit X 100 <= Reference weight
1
Select the percentage mode.
Push [Menu] key, then push [F1-F4] keys to go
to <11 MODE>.
Push [F4] key to change the setting value.
Push [F1/F2] key to select.
PCNT ： Percentage mode
Push [F4] key to fix.
2
Exit the setting menu.
Push [Menu] key to shift to the percentage
mode.
3
Select whether or not employ the
previous recorded reference value. Push [F3/F4] key to select whether or not
employ the previous data.
When there is no data record, this step is skipped.
Push [F3/F4] key to select.
NO : Change
YES : Not Change
When <YES> is selected, go to step 6.
4
Select the method of setting the
reference value.
Push [F3/F4] key to select.
onW ： Actual value
NUM ： Numeric value