Star Micronics MG-S Series, Operation Manual, Page: 29 / 114

MG-S series operation manual 2 Basic usage
－
19
－
2-5-3 Numeric value input
Input upper/lower limit, reference weight, preset tare weight, coefficient, specific gravity of the media
liquid, water temperature, date/time and ID/password at each mode.
Numeric value inputting is limited to eight digits at a maximum.
e.g.) When inputting “-5.4321”.
1
Input
“– “.
Push [Zero] key to change the polarity to
“-”.
2
Input
“1 “.
The digit for inputting is blinking.
Push [F1, F2] key to
increment/decrement the digit to “1”.
Push [F3] key to input the next digit.
3
Input
“2, 3, 4, 5 “.
・・・
Input “2, 3, 4, 5” by the procedure above.
4
Input
“.”.
Push [Tare] key to input “.” on the
immediately right of the blinking digit.
5
Fix the input value.
Push [F4] key to fix the input value.
“-5.4321” is saved on the balance.
“-” and “ . ” cannot be input in ID or Password setting.
cf. “8-5-1 Balance ID setting”