Star Micronics MG-S Series, Operation Manual, Page: 20 / 114

1 Prior to use MG-S series operation manual
－
10
－
1-6 Description of the operation keys
1-6-1 Basic
No Key Name of key Performance
1 [On/Off]
Turns on and off the power for the balance.
On: Push the key, Off: Push the key long
2 [Menu]
Used for calling/exiting the setting menu.
Used for canceling the setting value selection and going back to the
measurering mode.
3 [Output]
Use for data outputting.
Use for data importing in the Statistics/Formulation mode.
4 [Tare] Use for tare subtraction.
5 [Zero] Use for zero-point adjustment.
6
[F1]
([F] key)
<
< >
> :
:
Use for selecting the mode, function and item.
Use for moving up to the menu/item selections, or use for
incrementing the numeric values.
7
[F2]
([F] key)
<
< >
> :
:
Use for selecting the mode, function and item.
Use for moving down to the menu/item selections, or use
for decrementing the numeric value.
8
[F3]
([F] key)
<
< >
> :
:
Use for selecting the mode, function and item.
Use for moving to the upper menu layer, or use for
selecting the digit to change.
9
[F4]
([F] key)
<
<
<
>
>
>
:
:
:
Use for selecting the mode, function and item.
Use for moving to the lower menu layer, or use for
selecting the digit to change.
Use for entering/executing the selected
menu/item/value, or use for returning to the setting
menu/measuring mode.
The [F] keys on which < >, < >, < >, < >, < > or < > are displayed above are
valid.
Shortcuts for various modes/functions can be assigned to [F] keys. Please refer to
“8-2 Shortcut setting for accessing various measuring modes” and “8-3 Free key setting”.
These keys are called [F]
keys or [F1]-[F4] key in
this manual as a matter of
convenience, while there
are not such indications
around them.