Star Micronics MG-S Series, Operation Manual, Page: 11 / 114

MG-S series operation manual 1 Prior to use
－
1
－
1 Prior to use
1-1 Operating precautions
■
Do not wet the AC adapter.
That may cause an electric shock, short-circuiting or failure.
■
Do not handle the balance with wet hands.
That may cause short-circuiting or failure.
■
Do not use the balance in a wet location.
That may cause an electric shock, short-circuiting or failure.
■
Do not connect to the AC adapter cord or communication cable with its connector
or jack being wet.
That may cause an electric shock, short-circuiting or failure.
■
Do not use the balance in a dusty location.
That may cause dust explosion or fire.
That may cause short-circuit or malfunction of the balance.
■
Do not use the balance in explosive atmosphere.
That may cause explosion or fire.
Please order our explosive-proof balances to weigh in such a hazardous area.
■
Never disassemble or modify the batteries. Make sure you insert batteries with the
positive and negative poles correctly inserted, and be careful of short circuits.
Such mishandling could damage the batteries, or cause the balance to fail.
■
Obey the MSDS.
Measuring dangerous materials such as flammable liquid could cause an explosion or fire.
■
Do not disassemble or modify the product.
Doing so could result in injury, electric shock, fire and other accidents or failures. For inspection and
adjustment, contact the retailer from whom the product was purchased.
■
Do not move the product with a sample to be weighed set on the balance.
That may cause the sample to fall from the weighing pan, leading to a bodily injury or destruction of the
sample.
■
Do not route the AC cord across passages.
The cord could be tripped on by a passerby and the balance could fall down and break or injure
someone.
■
Do not use the product on an unstable table or a place that is subject to vibration.
That may cause the sample to fall from the weighing pan, leading to a bodily injury or destruction of the
sample. Besides inaccurate weighing may result.
■
Do not place an unstable sample on the weighing pan.
The sample may fall down, giving rise to a danger. Put an unstable sample in a container (tare) before
weighing it.
■
Only use the specified power supply.
Using any power supply other than that specified could cause overheating, fire or failure.
■
Do not bring the balance by holding the windshield.
The main body could drop and break down or injury someone. Make sure to hold the main body to bring
the balance.
■
Do not use the product in an abnormal condition.
If it should happen that an abnormal event such as smoking or unusual odor occurs, ask the store
where you purchased the product or our sales department for repair. Keeping using the product may
result in an electric shock or fire. In addition, do not ever try to repair it for yourself, or very dangerous
situation is likely to occur.
■
Only use the dedicated AC adapter.
Use of other types of power or adapters may result in heat generation or malfunction of the balance.