―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
5-2
5.1.3. JAN/EAN/UPC
Used numbers, not only the bar code symbols, are controlled using JAN, EAN and UPC as shared common commercial
codes. Mainly, they are used for supermarkets such as shops and grocery stores.
1. Each mode and bar code width
Items
Mode 1
Mode 2
Mode 3
Module Width
2 dots
3 dots
4 dots
Bar code width (*)
JAN/EAN-8
16.75 mm
25.125 mm
33.5 mm
JAN/EAN-13
23.75 mm
35.625 mm
47.5 mm
UPC-A
23.75 mm
35.625 mm
47.5 mm
UPC-E
12.75 mm
19.125 mm
25.5 mm
(*) Includes the guard bar (left/right/center) but not the white space.
2. Regulations
• JAN/EAN -8:
Data is in 7 or 8 digits. The command is ignored for others.
The check digit uses a modulus weight of 10/3 and is automatically applied.
When the calculated value and the numerical value of the 8
th
digit differ, the calculated value has priority.
• JAN/EAN -13:
Data is in 12 or 13 digits. The command is ignored for others.
The check digit uses a modulus weight of 10/3 and is automatically applied.
When the calculated value and the numerical value of the 13
th
digit differ, the calculated value has priority.
• UPC – A:
Data is in 11 or 12 digits. The command is ignored for others.
The check digit uses a modulus weight of 10/3 and is automatically applied.
When the calculated value and the numerical value of the 12
th
digit differ, the calculated value has priority.
• UPC – E:
Data is in 11 or 12 digits. The command is ignored for others.
The check digit uses a modulus weight of 10/3 and is automatically applied.
When the calculated value and the numerical value of the 12
th
digit differ, the calculated value has priority.
Data conversion to rectangles is automatic.
Data that cannot be shortened is processed as invalid data.