Stannah STAIRISER SR, User Handbook Manual

Page: 20 / 24

20
T R O U B L E S H O OT I N G G U I D E
For safety reasons, the Stairiser SR is equipped with several electrical and mechanical lock-
ing devices. The stairiser will not work if any of these devices are tripped or if the order of
events is incorrect. By following the instructions provided in the ensuing paragraphs, the user
will be able to determine the reason for breakdown. You must not manipulate, modify or
remove any safety feature of the stairiser.
Work through the following instructions paragraph by paragraph—do not skip any part! Be
sure that the landing controls are deactivated whenever the platform is folded down.
Before trouble shooting, pay attention to the following:
When a landing control is activated, it automatically deactivates all other wall con-
trols, i.e. the complete lift can only be controlled by one control at a time. If a wall
control activates the parked lift, no other control can signal the lift as long as this
wall control is active.
Please check that the main power switch, located at the left side of the drive box, is
activated. The green lamp on the platform should now glow.
Please check if the fuses in the distribution box of your house/business are working
and turned on.
If the lift is giving acoustic signals please check the batteries as described in the sec-
tion “battery charge system”.
If you call the service branch please note your lift number. You will find this at the
front of the carriage under the “serial number”. It’s the easiest way to identify your
lift to give fast and efficient advice.