Stannah STAIRISER SR, User Handbook Manual

Page: 16 / 24

16
If it’s necessary to evacuate a user from the lift due to either lift or power failure, the proce-
dures described here should be followed. A different process is needed, dependant on
where the platform has stopped:
Case 1
Case 1 Case 1
Case 1: The occupied platform is near a stop position
: The occupied platform is near a stop position : The occupied platform is near a stop position
: The occupied platform is near a stop position
Notice: The main power switch is on the side of the platform Notice: The main power switch is on the side of the platform Notice: The main power switch is on the side of the platform Notice: The main power switch is on the side of the platform
wall.
wall. wall. wall.
1.
Switch off main power switch.
2.
Insert hand wheel.
3.
Tighten the hand lever for break release and turn the hand
wheel until the next station has been reached.
4.
At every landing the barrier can be opened manually at the side where leaving the plat-
form is desired.
5.
Now the wheelchair driver can leave the platform.
6.
If using a manual platform, close the platform as usual. That means: First close the bar-
riers and then fold up the platform.
7.
If using an automatic platform, first fold down the barrier to the closed position. Then the
platform can be closed without any problem. The platform must be locked with the
padlock on the carriage.
8.
Call your service team!
E M E R G E N C Y O P E R AT I O N
Attention: Rescue of passengers can only be done by authorised people.
Insert hand wheel
Brake release
Hand wheel
and brake
lever
Main
power
switch