Stannah STAIRISER SR, User Handbook Manual

Page: 11 / 24

11
Wall Controls
Wall Controls Wall Controls
Wall Controls
All automatic platform lifts are equipped with wall controls which allow control from either
end of the staircase and allow for the folding down or up the platform.
Landing controls are fitted in the area of landing positions.
If the platform is not on the level on you require, call the platform by using the wall controls:
Switch on the wall control by inserting and turning the key. Press the “Up” or “Down” button
and the platform moves the given direction as long as you hold the button. The green light
starts to flash! The carriage travels as long as you keep the directional button on the wall
control depressed.
Wall controls only control the lift when the platform is folded up.
The carriage stops automatically at the stop position. To use the lift fold down the platform
by using the “Open” button. Press the button as long as it takes that the platform is in a
horizontal position and the barrier has opened completely. Simultaneously, the ramps turn
down to the correct position enabling safe driving/moving onto the platform. When the
platform is folded down, all controls other than the platform control lose their functionality.
This allows safe movement onto the platform.
O P E R AT I N G I N S T R U C T I O N S
Drive up button Drive up button Drive up button Drive up button
The platform will drive
up when in closed
(unfolded) position.
Platform open
Platform open Platform open Platform open
button
button button button
The platform will open
(unfold). This button
works only when the
platform is in the land-
ing station.
Drive down button Drive down button Drive down button Drive down button
The platform will drive
down when in closed
(unfolded) position.
Platform close
Platform close Platform close Platform close
button
button button button
The platform will close
(fold). The platform
should be closed when
in the landing station.