Stannah GOODSMASTER CD, User Handbook Manual

Page: 8 / 20

8
Fig.4 Fig.4 Fig.4 Fig.4
G E N E R A L LOA D I N G G U I DA N C E
DO’S AND DON’TS
DO DO DO DO make sure that the load is
secure and not overhanging
any part of the lift car. This
will ensure that the landing
door can be securely closed
and the load will not obstruct
the optical sensor (Fig.1).
DO DO DO DO close all landing doors
after unloading (Fig.2).
DO DO DO DO report any malfunctions
immediately, having first referred to the Troubleshooting section
DON’T DON’T DON’T DON’T slam into the rear wall of the car or
structure as this may cause damage to the lift
equipment
(Fig.4).
DON’T DON’T DON’T DON’T overload the lift. The maximum
rated load of the lift is dependent on the
lift model, and is displayed on the load
plate. Ensure that goods stacked in the lift
car are stable
stable stable
stable and will not fall. (Fig.5)
DON’T DON’T DON’T DON’T try to prise the
landing door open, as
you will damage the
door lock mechanism
(Fig.6).
Fig.1
Fig.1 Fig.1
Fig.1
Fig.2 Fig.2 Fig.2 Fig.2
Fig.5
Fig.5 Fig.5
Fig.5
Fig.6
Fig.6 Fig.6
Fig.6