Stannah GOODSMASTER CD, User Handbook Manual

Page: 13 / 20

13
COMMUNICATION SYSTEMS
Communication systems within the lift car enable an attendant in the lift car to summon
help if a difficulty arises or the lift malfunctions.
Intercom in the lift car (Option) see pg.14
Intercom in the lift car (Option) see pg.14 Intercom in the lift car (Option) see pg.14
Intercom in the lift car (Option) see pg.14
The intercom is between the lift car operating panel and controller only. The intercom
system will allow verbal communication with a receptionist, caretaker or other person suita-
bly trained to offer assistance or implement emergency procedures. Simply press the
“speak” button and talk into the metal grille to operate.
Lift car autodialler (Option) see pg.15
Lift car autodialler (Option) see pg.15 Lift car autodialler (Option) see pg.15
Lift car autodialler (Option) see pg.15
The autodialler is fitted to the car operating panel and enables pre-programmed numbers
to be dialled to summon external assistance.
FULL HEIGHT LIGHT RAY
A full height light ray and car gate is fitted at the entry and exit points of the lift car to help
prevent goods movement. Activation of the light ray will automatically stop the lift if an
object breaks the beam while the lift is moving.
KEYSWITCH OVERIDE CONTROLS
A key switch is provided on the car operating panel to enable the attendant to switch
between automatic landing control and constant pressure car control modes. It is not
advisable to travel in the lift car when it is in automatic control mode.
LOAD WEIGHING / EXCESS LOADS
A load weighing device is fitted to the lift. A buzzer will sound intermittently when the rated
load amount is within the lift car, including any attendant. The buzzer will continue to
sound, to operate the lift remove some of the load until the buzzer stops and the lift will
reset automatically.
NOTE: The lift will not operate whilst the buzzer sounds and the rated load has been
exceeded.
C D P L U S - F E AT U R E S