Technical Data
Supply Voltage:
220-240 V ~ 50/60 Hz
Bulb Type:
Non-replaceable 20W LED
(See rating / box info)
The light source contained in this luminaire
shall only be replaced by the manufacturer or
his service agent or a similar qualified person.
Conformity with all relevant UK & EC Directive
requirements.
Class I product, must be connected to earth.
IP65
Totally protected against dust.
Protected against low pressure jets of water
from all directions. Limited ingress permitted.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or local store for recycling
advice.
SXLS35525E - 20W
20W LED Worklight
Instruction Manual
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
The thick and thin horizontal line field and the engineering plan packaging design are trademarks
of Stanley Tools.
CUSTOMER SUPPORT:
For customer service please visit the Online Customer Service Centre at: www.2helpU.com
© Stanley Black & Decker, Inc.
STANLEY and the STANLEY Logo are trademarks of Stanley Black & Decker, Inc or one of its afiliates,
and are used under license.
Products are manufactured by:
Cascade Holdings Ltd.
Gorse Mill, Gorse St
Oldham, OL9 9RJ U.K.
www.stanleytools.co.uk
2-YEAR LIMITED WARRANTY
The warranty of this product is covered by Cascade Holdings Ltd.
Eu Authorised Representative:
Authorised Rep Compliance
Ground Floor
71 Lower Baggot Street
Dublin
Ireland
D02 P593
