background image

*

TECHNICAL INFORMATION

Specifications

Inflator

SXCM27550323

Voltage

240V AC ~ 50Hz

Motor

Electric 2.75 HP

Wattage

2100W

No Load Speed

2800 RPM

Free Air Delivery (FAD)

200L per minute

Tank Size

50L

Duty Cycle

75%

Max. Tank Pressure

145PSI (10 Bar)

Outlet Pressure

1PSI - 145 PSI Adjustable

Minimum Generator Size

Pure Sine Wave 5000W

Noise Rating

62dB@5m

Motor/Pump

Kicks in 115PSI

Pressure Cycle

Stops 145PSI

Number of Outlets 

2

For any queries or assistance call

Customer Service

AUST. 1300 660 457

NZ 0800 474 876

Hours of operation: 

Monday to Friday 8.00am - 5.00pm AEST

Do not return to place of purchase.

Keep your purchase receipt, this will be required to  

make any claims under the 24 month warranty.

STANLEY®, The STANLEY Logo, The Notched Rectangle and the Yellow and Black Diagonal Package 

Design are all trademarks of the Stanley Black & Decker, Inc or an affiliate thereof and are used under 

license.  Product manufactured and distributed by Smart Marketing Group Pty Ltd.  

Manufactured in China.

MAINTENANCE

Daily: Before use

1.  Seal the tank drain tap,see page 15, Pic. 12.
2.  Check safety valve operation,see page 14, Pic. 10.

After Use

1.  Open the tank drain tap,see page 15, Pic. 12  

and leave open to allow to drain.

2.  Wipe down the compressor.
3.  Store safely and securely.

If your compressor does not start

• Check that you have plugged the power lead into a 

standard 240V 10Amp power point and turned the 
switch ON.

• Check that you have turned the air compressor ON/OFF 

switch ON.

• The air tank may be full.  Use your air tool and the air 

compressor should start when the pressure decreases 
to 115PSI.

If these tips do not work please have your unit checked by 
an authorised service centre.

TROUBLE SHOOTING

Summary of Contents for SXCM27550323

















Reviews: