background image

CARE AND MAINTENANCE

12

Detergents

•     Use detergents designed for power washers. These 

can be purchased online at our website www.
stanleypressurewashers.com. Hardware stores or 
home centers also have power washer detergents 
for different cleaning projects. The cleaning solution 
should be the consistency of water in order to 
prevent clogging your detergent bottle and nozzle.

•     This system applies detergent under low pressure. 

The cleaning power of the detergents is enhanced 
when applied with low pressure and enough 
time is given to break down dirt and grime. The 
combination of low pressure and chemical action is 
very effective and can be better than scrubbing if 
applied properly. 

ALWAYS

 spray detergent on a dry 

surface. 

DO NOT 

pre-soak area. Wetting the surface 

first dilutes the detergent and reduces its cleaning 
ability. 

DO NOT

 allow detergent to dry on surface. 

On vertical surfaces being cleaned, apply detergent 
to lower surfaces and work your way up to prevent 
detergent from causing streaks in the dirt and grime. 
Rinse detergent by pressure washing from bottom 
up for same reason.

•     If a stain is particularly tough, it may be necessary 

to reapply the detergent and use a bristled brush to 
scrub the stain. Subsequent power washing after 
brushing should successfully complete your cleaning 
job.

Cleaning Garden Hose Adapter

•    The screens inside the adapter should be cleaned 

periodically. Rinse it with clean water, and then place 
it back in the adapter.

Cleaning Nozzles

•  A clogged or partially clogged nozzle can cause 

significant reduction of water pressure coming out 
of the nozzle and/or cause the unit to pulsate while 
spraying.

•  Turn off the unit.
•  Turn off the water supply to the unit.
•  Relieve any pressure trapped in the hose by squeezing 

the trigger 2-3 times, and then lock the spray gun by 
pushing the lock button from left to right.

• Remove the lance from the extension lance
•  Take off the variable spray nozzle lance. Rotate the 

nozzle to narrow the stream setting which opens up 
the fan blades

•  Using the nozzle tip cleaner provided (or an unfolded 

paper clip), insert the wire into the nozzle hole and 
move back and forth until debris is dislodged.

•  Tap quick connect end of lance on hard surface 

several times

•  Back flush water through the nozzles using garden 

hose and highest pressure available (either standard 
water nozzle or use your thumb over the nozzle to 
create water pressure for back flush).

93902_16ARN027_1600_ENG-FR-SP.indd   12

16/12/14   下午5:46

Summary of Contents for SHP 1600

















Reviews: