D-RING HAND PLIERS
RINGER9/16
WARNINGS
•
Always
read tool manual before operating.
•
Always wear safety glasses while operating or
while in the vicinity of a tool in operation.
•
For testing, always cycle tool away from work
to insure proper ring closure. For safety
reasons, an improperly functioning tool
must
not
be used.
OPERATION
Always handle tool with care:
•
Never engage in horseplay.
•
Keep others at a safe distance from the tool
while the tool is in operation as actuation
occurs, possibly causing injury. Keep hands and
body away from the jaw mechanism of the tool.
•
Never place a hand or any part of body in jaw
mechanism area of tool.
SAFETY INSTRUCTIONS
WARNING:
The employer and/or user must
ensure that proper eye protection is
worn. Eye protection equipment
must conform to the requirements of the American
National Standard Institute, ANSI Z87.1-1979 and
provide frontal and side protection. Eye protection
should be worn by the operator and others in the
work area when loading, operating, or servicing this
tool. Eye protection is required to guard against
possible flying particles and/or debris, which could
cause severe eye injury.
NOTE: Non-side shielded prescription glasses and
faceshields alone do not provide adequate
protection.
1
of
4
07/04
Summary of Contents for RINGER9/16
Page 2: ...2 of 4 07 04...
