iQ Control Box
10.18.2019
1.800.7.ACCESS • www.stanleyaccess.com • Document # 204143 REV 5 43
Cop
yr
ight 2019, S
tanley Ac
cess T
echnologies, LL
C. All rights r
es
er
ved. R
epr
oduction
in whole or in p
ar
t without the expr
ess wr
itt
en permission o
f S
tanley is pr
ohibit
ed.
Attachment 8
ANSI/BHMA and UL Compliance Requirements for Swinging and Folding Doors
(Sheet 1 of 2)
Final adjustment and proper operation of the door system
must be and shall be performed in the field.
NOTE
: These instructions are for informational purposes and do not substitute for review against the current
revision of the referenced standards. Where a requirement exists in multiple standards, such as the ANSI/
BHMA standard and the UL standard, the more restrictive condition applies. Other local codes and fire codes
likely exist, and must also be followed.
ANSI/BHMA A156.10 Full/Standard Power Swinging and Folding Door Systems
Full/standard power swinging and folding door systems must be installed and adjusted for compliance with
the current version of ANSI/BHMA A156.10, “American National Standard for Power Operated Pedestrian
Doors”.
Critical aspects of the installation for compliance with A156.10 include:
• Guide rail size, location, and type.
• Control mat size, layout, molding height, active areas and sensitivity.
• Sensor pattern size, sensitivity, and function.
• Knowing Act guidelines, secondary activating zones and double egress swing door requirements.
• Entrapment protection rules including door speeds, forces, and time delays.
• Signage. (Decals and application instructions are provided with the door operator.)
ANSI/BHMA A156.19 Low Energy Swinging Door Systems
Low energy swinging door systems must be installed and adjusted for compliance with the current version of
ANSI/BHMA A156.19, “American National Standard for Power Assist and Low Energy Power Operated Doors”.
Critical aspects of the installation for compliance with A156.19 include:
• Opening times and force.
• Closing times and force.
• Manual opening force.
• Time delay.
• Signage. (Decals and application instructions are provided with the door operator.)
UL 325 Compliance
All power operated door systems must be installed in compliance with the current edition of UL 325, “Stan-
dard for Safety for Door, Drapery, Gate, Louver, and Window Operators and Systems”.
