7610 Instructions Confidence Bed Handle V 1.0
Instructions:
1. Remove all components from the box and verify all parts are included as shown in Figure 1.
FIGURE 1
2. Attach the Arch Tube to the Base Tubes with Short Bolts and Female Nuts using the Allen Wrench, as
shown in Figure 2.
NOTE
: The strap wire at the end of the Base Tubes should be oriented as shown in Figure 2.
FIGURE 2
3. The Handle height adjustment holes allow the Handle to be positioned properly to accommodate varying
mattress thicknesses (10 to 17 inches).
The “Top of the Handle” must be installed at a position of 4 to 7 inches above the top of the Mattress and
located 12.5 or more inches from the head end of the bed as shown in Figure 3.
FIGURE 3
