Standard Horizon GX2400GPS, Owner'S Manual

Page: 94 / 148

92
14.3.3 CPA/TCPA Alarm
Enable/disable the CPA/TCPA alarm functions. The default setting is “OFF”.
1.
Press & hold [
]

“ AIS SETUP ”

“ CPA/TCPA ALARM ”
2. Rotate the DIAL/ENT knob to select “ CPA ” or “ TCPA ”,
then press the [ SELECT ] soft key.
3. Rotate the DIAL/ENT knob to select “ OFF ” or “ ON ”.
4. Press the [ ENTER ] soft key to store the selected
setting.
5. Press the [ CLEAR ] key to return to radio operation.
NOTE
The alarm will sound until it is disabled (1) by pressing any key, (2) following
the steps above and selecting “OFF” in step 3, or (3) when the ship is out of
the selected CPA/TCPA alarm range. The alarm is produced from the front
panel speaker, the speaker in the microphone, the optional external speaker
and optional RAM4 and RAM4X microphone when connected.
14.3.4 IGNORE VESSELS
This function allows listed registered AIS vessels to be ignored by the CPA /
TCPA alarm function.
1.
Press & hold [
]

“ AIS SETUP ”

“ CPA/TCPA ALARM ”
2. Rotate the
DIAL/ENT
knob to select “
IGNORE
VESSELS ”, then press the [ SELECT ] soft key.
3. Rotate the DIAL/ENT knob to select “ ADD ”, then
press the [ SELECT ] soft key.
4. Rotate the DIAL/ENT knob to select “ NAME: ”, then
press the [ SELECT ] soft key.