12
13
Rev. 19.09.2020
Rev. 19.09.2020
PRODUCT NAME:
PLASMA CUTTER
MODEL:
S-CUTTER 50.1 | S-CUTTER 70.1
IMPORTER:
EXPONDO POLSKA SP. Z O.O. SP. K.
IMPORTER ADDRESS:
UL. NOWY KISIELIN-INNOWACYJNA 7, 66-002 ZIELONA GÓRA | POLAND, EU
SYMBOLS
Operation manual must be reviewed.
Never dispose of electrical equipment together with household waste .
This machine conforms to CE declarations.
Use full body protective clothes.
Attention! Wear protective gloves.
Safety goggles must be worn.
Protective footwear must be worn.
Attention! Hot surface may cause burns.
Caution! Fire or explosion hazard.
Caution! Harmful vapours, poisoning hazard. Gases and vapours may be hazardous to health.
During the welding process, welding gases and vapours are released.
Inhalation of these substances may be hazardous to health.
Use a welding mask with appropriate filter shading degree.
WARNING! Harmful radiation of welding arc.
EN
CE
PLEASE
NOTE!
Drawings in this manual are for illustration purposes only and in some details may
differ from the actual machine.
The original operation manual is in German. Other language versions are translations from German.
BEFORE STARTING THE DEVICE, READ THE INSTRUCTION MANUAL THOROUGHLY
AND OBSERVE THE FOLLOWING GUIDELINES:
Familiarize yourself with the instruction manual and the device.
For your own safety and that of third parties, observe the safety instruction and the guidelines specified
in the manual. People under 18 as well as those unfamiliar with the instruction manual are not allowed to
operate the device.
The device may only be used in accordance with its purpose.
NOTE
•
ensure your own safety and that of third parties by reading and following the device use guidelines
•
Only qualified persons can be allowed to use, operate and repair the device
•
While the device is in use, do not allow any third parties near it, particularly underage persons
CUTTING MAY CAUSE FIRE OR EXPLOSION
A plasma beam ejects incandescent metal particles or sparkles. Hot metal particles, sparks, heated elements
or hot burner may cause fire. Therefore, it is necessary to closely examine the work place surroundings in
terms of safety.
•
Remove any flammable material within 12 m from the burner
•
If that is not possible, the flammable materials are to be covered with an appropriate covering.
•
It is forbidden to cut in places where flammable materials may be ignited.
•
Use means of protection against stream of sparks and incandescent metal particles.
•
Keep in mind that sparks or hot metal splinters may penetrate through gaps or openings.
•
Pay close attention to the electric arc and make sure a fire extinguisher is at hand.
•
Keep in mind that cutting close to a ceiling, on the floor or between partitioned space may cause a fire
on the other, not visible side.
DO NOT WELD NEAR TANKS OR BARRELS WITH FLAMMABLE SUBSTANCES.
The supply cable is to be plugged into the nearest socket and arranged in a practical and safe manner. Avoid
careless arrangement of the cable in the room on untested floor, which may cause an electric shock or fire.
•
Do not use the plasma cutter to heat frozen pipes.
•
Do not cut with plasma near flammable materials/containers. Flammable materials or containers are to
be removed or thoroughly emptied.
•
Do not cut with plasma in an atmosphere containing flammable particles or vapours of explosive
materials.
•
Do not plasma-cut pressurized tanks, pressure system pipes or pressurized containers.
•
It is forbidden to plasma-cut containers with flammable materials.
•
During plasma-cutting, it is required to wear clean, oil-free protective clothes, e.g.: leather gloves, thick
shirt, high boots and protective hood.
•
The plasma cutting station is to be located away from flammable surfaces.
•
Before starting plasma-cutting, get rid of flammable or explosive objects, such as propane-butane
lighters or matches.
•
Observe safety and OHS regulations applicable to welding work and ensure the work station is
equipped with an appropriate fire extinguisher. The flame and the working circuit are energized if the
electric power supply is activated. The input and internal circuit of the device are also energized if the
electric power supply is activated.
Compared to welding, plasma cutting requires high initial voltage to initiate the electric arc (usually 200 to
400 VDC). The device is equipped with a pistol with safety lock, which the device deploys automatically if the
shield loosens or if the tip within the nozzle area moves. Incorrect installation or grounding of the device and
equipment may cause a hazard to life or health.
ELECTRIC SHOCK IS HAZARDOUS FOR LIFE AND HEALTH
•
Do not touch energized elements.
•
Wear dry, insulated gloves without any holes as well as protective clothes.
•
Use insulation mats or other insulation coatings on the floor, which are large enough to prevent the
body from touching the workpiece or the floor.
•
Do not touch the electric arc if it touches the workpiece or the floor.
•
Before operating, cleaning or replacing the electrode, disconnect the electrical power supply.
•
Before installation or maintenance, disconnect the power supply.
•
Ensure that the grounding cable is properly grounded and the pin is properly connected to a grounded
socket.
•
Always carefully inspect the grounding.
•
Before connecting the input, select an appropriate grounding.
•
Regularly inspect the power cables against damage or lack of insulation. Any damaged cable must be
replaced immediately. Cables must be replaced if any damage is found. Improper repair of the insulation
may cause death or injury.
•
Turn the device off when it is not used.
•
Replace the cable if you notice any signs or abrasion or local damage.
•
Do not coil the cable around your body.
•
The welded workpiece is to be properly grounded.
•
Use only equipment in good condition.
•
Any damaged elements of the device are to be repaired or replaced.
•
During work at elevated heights, use safety harness.
•
All the elements of equipment and safety should be located in one place.
•
It is forbidden to deactivate the safety system.
EN
U S E R M A N U A L
