ASSEMBLY INSTRUCTIONS
7
STEP 4
For easier installation of the
FOAM GRIPS(20),
lubricate the
HANDLEBAR(4)
with a small amount of
liquid soap. Slide the
FOAM GRIPS(20)
onto the
HANDLEBAR(4).
STEP 5
Attach the
MOUNTING BRACKET(21)
onto the
HANDLEBAR(4)
with
ROUND HEAD SCREWS
(M5 x 15mm)(33).
STEP 6
Install an
"AA"
battery into the
METER(22),
one battery included. See page 8 for detailed battery installation
instructions. Slide the
METER(22)
onto the
MOUNTING BRACKET(21).
Make sure the
SENSOR
WIRE(23)
is located at the front of the
HANDLEBAR(4)
, then plug the
SENSOR WIRE(23)
into the
METER(22).
Make sure the SENSOR WIRE(23)
is located at
the front of the
HANDLEBAR(4).
