background image

When calling for parts or 

service, please specify 

the following number

 

:

Model#: 55-5000

CAUTION:

Weight on this product should not exceed 350 lbs.

Owner's

Manual

This Product is Produced Exclusively by

2040  N.  Alliance,  Springfield,  MO 65803

Customer Service

1 (800) 375-7520

www.staminaproducts.com

Product May Vary Slightly From Pictured.

!

 WARNING 

!

Exercise  can  present  a 

h e a l t h  r i s k .  C o n s u l t  a 

physician  before  beginning 

any  exercise  program  with 

this  equipment.  If  you  feel 

faint  or  dizzy,  immediately 

discontinue  use  of  this 

equipment.  Serious  bodily 

injury  can  occur  if  this 

equipment is not assembled 

and used correctly. Serious 

bodily injury can also occur 

if  all instructions are not 

followed.  Keep  others  and 

pets  away  from  equipment 

when in use. Always make 

sure  all  bolts  and  nuts  are 

tightened  prior  to  each 

u s e .  F o l l o w  a l l  s a f e t y 

instructions in this manual.

STAMINA PRODUCTS

MADE IN CHINA

© 

2010 Stamina Products, Inc.

2010, 06

Patent Nos. D382,319

and  7,179,207.

  Other patent(s) apply

& are pending

Summary of Contents for AeroPilates Performer Plus
























Reviews: