To get your ePipe up and running quickly, follow the four
steps below.
To understand how you can use ePipe see “Using ePipe”
in the “ePipe Exposed” section of the Stallion Software &
Documentation CD-ROM.
➊
➊
➊
➊
➊
Before you Start
Check the packing list below to ensure you have all the correct parts (cables are color
coded for identification):
Your ePipe kit should contain:
r
ePipe 2202 unit
r
AC/DC power supply unit
r
Two Ethernet UTP cables
(green connector)
r
Console cable with DB9 connectors
(black)
r
Stallion Software & Documentation CD-ROM
r
Warranty Registration Card
r
Quick Setup Guide (this card)
➋
➋
➋
➋
➋
What Else do you Need?
To connect your ePipe to an Internet Service Provider (ISP) or other network you will need
the following:
•
PC running Windows (95, 98, NT or 2000) with an Ethernet Network Interface
Card (NIC) configured and operational to use the “Find ePipe” utility
•
A cable or xDSL modem or a dedicated access router (ISDN, T1, Frame Relay,
etc)
•
A cable, xDSL or other dedicated connection
•
An account with an ISP for connecting to the Internet
•
An available port on your Ethernet hub or switch to which you will connect
the ePipe 2202
Item # 730120 Revision 1.00
Troubleshooting
Should you experience any difficulty with your ePipe, you may want to recheck previous
steps in this Quick Setup Guide to ensure correct installation.
Each ePipe is shipped with diagnostic tools that allows you to fully test the operation of
the unit. If you experience a problem with your system or network, the diagnostics will
help enable you or your support provider to pinpoint the difficulty. Consult the ePipe
documentation for more information.
Documentation CD-ROM and Stallion Web Site
All user documentation and drivers for ePipe and other Stallion products are included on
the Stallion Software & User Documentation CD-ROM and from the Stallion web site at
http://www.stallion.com/
. A section in the documentation is dedicated to problem deter-
mination. Please ensure these procedures are followed before reporting a fault.
Warranty / Registration
Stallion is offering
free telephone support
for the term of ePipe’s three year limited
warranty by completing the on-line registration available from the Stallion web site at
http://www.stallion.com/
, or by mailing the completed ePipe Warranty Registration Details
form to the nearest Stallion office (see below) within 30 days of purchase. Unregistered
users may access our Technical Support Team by email only. Registered customers will
also receive the latest information on Stallion's leading-edge product developments.
Corporate Addresses
Asia/Pacific
The Americas
Europe / Middle East / Africa
Stallion Technologies P/L
Stallion Technologies, Inc.
Stallion Technologies GmbH
P.O. Box 954
2880 Research Park Drive, Suite 160
Martin-Behaim-Strasse 12
Toowong QLD 4066
Soquel, CA 95073
63263 Neu-Isenburg
AUSTRALIA
USA
GERMANY
Tel: +61 7 3270 4242
Tel: +1 831 477 0440
Tel: +49 6102 7397-0
Tel: +61 7 3270 4243 (supp) Tel: +1 800 729 2342 (supp)
Fax: +49 6102 7397-10
Fax: +61 7 3270 4245
Fax: +1 831 477 0444
Email: [email protected]
Email: [email protected]
Email: [email protected]
2202
Quick Setup Guide
ePipe Quick Setup Guide