DJ Lase Pro 1000 RGB
6
ILDA connectors
Using the International ILDA input, you can connect laser graphics signal sources to the device that supply
signals as standardized by the International Laser Display Association (ILDA). The output of the device can be
connected to other devices.
The ILDA interface is realized as a 25-pin D-sub (DB 25) connector. The figure below and the following table
show the pin assignment.
1
25
14
13
1
X+
2
Y+
3
In
4
Interlock A
5
R+
6
G+
7
B+
8
User-defined signal 1+
9
User-defined signal 2+
10
User-defined signal 3+
11
User-defined signal 4+
12
Projector return signal
13
Shutter
14
X–
15
Y–
16
Intensity–
17
Interlock B
18
R–
19
G–
20
B–
21
User-defined signal 1–
22
User-defined signal 2–
23
User-defined signal 3–
24
User-defined signal 4–
25
Ground
DMX connectors
A female 3-pin XLR connector is used for the DMX output, a male 3-pin XLR connector for the DMX input. The
figure below and the following table show the pin assignment.
3
1
2
1
Ground
2
DMX data (–)
3
DMX data (+)
