Operating Instructions Scanner IDM
Assembly and disassembly
Page 16 of 36
R. STAHL HMI Systems GmbH / OI_Scanner_IDM_en_V_01_00_04.docx / 29.01.2016
10.3 Wired handheld scanner
The wired handheld scanner is connected to the VB-IDM160-XX6-RS232-SR-* connection
cable by inserting the RJ45 plug into the corresponding socket until you can hear a "click". Then
check that the cable is firmly connected.
Then connect the scanner cable with the fixed socket and insert the scanner into the
corresponding bracket at the field enclosure.
10.4 Base loading station
Before screwing the base loading station onto the field enclosure, the VB-IDM160-Base-RSi-
RS232-SR-*.8m-Z1 connection cable must be inserted into the opening on the underside of the
base loading station.
For this, insert the cable fully into the socket until you can hear a "click". Then check that the
cable is firmly connected.
The base loading station is connected to the field enclosure by means of three screws
(1x M4x30 mm; 2x M4x40 mm).
Then insert the connection cable into the fixed socket.
Screw holes
Summary of Contents for IDM160
Page 35: ......
