© 2022 Staheli West
50
1
3
5
2
4
6
Go to Menu > Settings > Tune Burner (the DewPoint
needs to be running to tune the burner).
The machine needs to be full of water in order to tune.
It is best to tune the burner at the location and alti-
tude where the DewPoint machine will be used.
Decrease louver position until dark smoke appears.
Then increase louver position an additional 4%.
Press “Low Tune” and wait for the burner to reach
“Low Fire”.
Increase louver position slowly until dark smoke
disappears.
To tune high fire, press “High Tune” and wait for the
burner to reach “High Fire”. Then repeat steps 3-5 but
this time for the “Louver High Fire Position”.
Burner Tune
