© 2022 Staheli West
48
Fill Water Tanks
1
3
5
2
4
6
Ensure you have the proper water treatment equip-
ment for your water. Contact your dealer if you have
questions.
Connect hose to the supply water fill valve.
Open the supply water fill valve.
Slowly open the induction valve and suction 1 gallon
of water treatment chemical into the supply tanks.
Always add 1 gallon of chemical for every 1000
gallons of water.
Your water setup should be similar to the above
picture.
To DewPoint
Machine
Start your water transfer pump to begin filling the
DewPoint supply tanks with water.
When the tank is about 3/4 full, reduce the flow rate
by closing the
fill valve
half way. Give the tanks some
time to equalize and finish filling. *Tip: Fill the boiler
with water and then top off the supply tanks for
longer operating time.
1 Gallon
Chemical
