ST ZigBee dual IF EEPROM, User Manual, Page: 20 / 40

STM3220G-EVAL demonstration board UM1519
20/40 Doc ID 022813 Rev 2
26 PG4 FSMC_A14 -
28 PG2 FSMC_A12 -
30 GND - -
32 PD13 FSMC/MC
SB14 open.
Disconnect motor control board from
CN5.
34 PD11 FSMC_A16 -
36 PD9 FSMC_D14 -
38 PB15 OneNAND_INT Remove R53
40 PB14 MII_INT Remove R41
42 PB12 ULPI_D5 -
44 NC - -
46 NC - -
48 APP_3V3 - -
50 GND - -
Table 10. Daughterboard extension connector CN4
Pin Description Alternative function
How to disconnect with function
block on STM322xG-EVAL board
1 GND - -
3 PI6 DCMI_D6 & MC
Remove camera module from CN15.
Disconnect motor control board from
CN5
5 PI4 DCMI_D5 & MC
Remove camera module from CN15.
SB16 open
7 PE0 FSMC_BL0 -
9 PB8 MII_TXD3 & MC
Remove RS5
SB10 open
Disconnect motor control board from
CN5
11 BOOT0 BOOT0 -
13 PB6 I2C1_SCK Remove R103
15 PB4 TRST -
17 PG15 User button Remove R150
19 GND - -
Table 9. Daughterboard extension connector CN3 (continued)
Pin Description Alternative function
How to disconnect with function
block on STM322xG-EVAL board