ST ZigBee dual IF EEPROM, User Manual

Page: 15 / 40

UM1519 STM3220G-EVAL demonstration board
Doc ID 022813 Rev 2 15/40
1.12 Daughterboard extension connector CN1, 2, 3 and CN4
Four male headers CN1, 2, 3 and CN4 can be used to connect the daughterboard or
standard wrapping board to the STM322xG-EVAL demonstration board. A total number of
140 GPIOs are available on the board.
Each pin on CN1, 2, 3 and 4 can be used by a daughterboard after disconnecting it from the
corresponding function block on the STM322xG-EVAL demonstration board.
The adapter is connected to the extended connectors CN2 and CN4 on the STM322xG-
EVAL (for more detailed information, please refer to
Table 8 to Table 10 ), it allows the
connection of a ZigBee smartplug coordinator and the I2C/RF dual interface EEPROM
M24LR64-r.
10 PD5 FSMC_D4
11 PD6 FSMC_D5
12 PD7 FSMC_D6
13 PD8 FSMC_D7
14 PD10 FSMC_D8
15 PD11 FSMC_D9
16 PD12 FSMC_D10
17 PD13 FSMC_D11
Table 6. LCD modules (continued)
3.2” TFT LCD with touchscreen (CN16)
Pin on CN16 Pin name Pin connection
Table 7. Daughterboard extension connector CN1
Pin Description Alternative function
How to disconnect with function
block on STM322xG-EVAL board
1 GND - -
3 PE3 Trace_D0 and FSMC_A19 Keep JP2 on 2<->3
5 PE5 Trace_D2
7 PI8 LCD_HSYNC -
9 PC14 OSC32_IN Remove R84, SB4 closed
11 PC15 OSC32_OUT Remove R85, SB5 closed
13 PI10 MII_RX_ER Remove RS3
15 PF0 FSMC_A0 -
17 PF2 FSMC_A2 -
19 GND - -
21 PF5 FSMC_A5 -
23 PF7 SmartCard_RST -