Introduction
The
is an industrial digital output expansion board for
. It provides a powerful and flexible
environment for the evaluation of the driving and diagnostic capabilities of the
single high-side, smart power,
solid-state relay in a digital output module connected to 2.5 A industrial loads.
The
interfaces with the microcontroller on the
via 5 kV optocouplers driven by the GPIO
pins and Arduino
®
UNO R3 connectors.
The expansion board can be connected to either a
development board.
You can also evaluate a system consisting of an
through the main supply rail and the
through the output of the
, you can achieve the typical architecture of a single channel digital output for safety systems. The
process stages of the two expansion boards result cascaded. The load connected to the
output can be
supplied only when both cascaded systems are properly working.
Figure 1.
X-NUCLEO-OUT15A1 expansion board
Getting started with the X-NUCLEO-OUT15A1 industrial digital output expansion
board for STM32 Nucleo
UM3036
User manual
UM3036
-
Rev 1
-
June 2022
For further information contact your local STMicroelectronics sales office.
www.st.com
