1
Getting started
1.1
Overview
The main features of the
expansion board are:
•
Bluetooth v4.2 compliant, FCC and IC certified
module (FCC ID: S9NBNRGM0AL; IC: 8976C-BNRGM0AL)
•
–
Embedded Bluetooth low energy protocol stack (GAP, GATT, SM, L2CAP, LL, RFPHY)
–
Embedded
network processor
–
On-board chip antenna
•
Small form factor: 11.5 mmx13.5 mm
•
Equipped with Arduino UNO R3 connector
•
Scalable solution capable of cascading multiple boards for larger systems
•
Free comprehensive development firmware library and samples for
, compatible with
firmware
•
RoHS compliant
1.2
Hardware requirements
The
expansion board can be plugged onto any
, although complete testing
has only been performed using the
development boards. To function
correctly, the
must be connected to the STM32 Nucleo board as shown below.
Figure 2.
X-NUCLEO-IDB05A2 and STM32 Nucleo stack
UM2700
Getting started
UM2700
-
Rev 1
page 2/18