ST X-NUCLEO-53L4A2, User Manual, Page: 9 / 22

4 Graphical user interface (GUI) and programming example for the
X-NUCLEO-53L4A
2
To evaluate the VL53L4CX device performance, use the related GUI or the X-CUBE-TOF1 .
The X-NUCLEO-53L4A2 expansion board requires the NUCLEO-F401RE development board to use the GUI or
run the ranging examples included in the X-CUBE-TOF1 .
Important:
Despite the fact that the
X-NUCLEO-53L4A2 can be stacked on any STM32 Nucleo board equipped the Arduino R3
connectors, the GUI is designed to work with the NUCLEO-F401RE only.
Download the GUI (in the Tools and Software tab of the X-NUCLEO-53L4A2 web page) or the X-CUBE-TOF1 to
evaluate the VL53L4CX .
UM2976
Graphical user interface (GUI) and programming example for the X-NUCLEO-53L4A
2
UM2976 - Rev 1
page 9/22