1.3
Spacers and covers
The
expansion board is delivered with:
•
three spacers of 0.25 mm, 0.5 mm, and 1 mm height, used to simulate different air gaps between the
and the rectangular-shaped cover glass;
•
an oval-shaped cover glass to simulate the integration of the
into the customer's final product;
•
two six-pin headers that allow connecting the two breakout boards to the
board.
Attention:
The
is delivered with a liner to prevent potential foreign material from piercing the module holes
during the assembly process. Remove this liner before use.
UM2976
Spacers and covers
UM2976
-
Rev 1
page 3/22