ST X-NUCLEO-53L4A2, User Manual, Page: 6 / 22

3 Breakout boards
The X-NUCLEO-53L4A2 package does not include the VL53L4CX breakout boards.
You can purchase them in a pack of two PCBs as SATEL-VL53L4CX .
The X-NUCLEO-53L4A2 supplies the VL53L4CX breakout boards at 3.3 V (see Figure 4 ).
For mechanical integration purposes, it could be interesting to use the mini PCB by breaking the SATEL-
VL53L4CX along the red line as shown in the figure below. It is easier to integrate this setup into a customer's
device thanks to its small size.
Figure 5. SATEL-VL53L4CX
The SATEL-VL53L4CX boards can be directly plugged onto the X-NUCLEO-53L4A2 through the two 6-pin
headers (see Figure 6 ).
As an alternative, they can be connected to the X-NUCLEO-53L4A2 by using the mini PCB through flying wires
(see Figure 7 ).
UM2976
Breakout boards
UM2976 - Rev 1
page 6/22