manualshive.com logo in svg

ST X-CUBE-SBSFU, User Manual, Page: 80 / 94

Share
Download
ST X-CUBE-SBSFU User Manual Download Page 80

Firmware image preparation tool

UM2262

80/94

UM2262 Rev 6

When compiling with the IDE, the keys and firmware image are handled. No extra action is 
required from the user. At the end of the compilation steps:

•

The required keys are embedded in the 

SECoreBin

 binary

•

The firmware image to be installed is generated in the proper format, with the 
appropriate firmware header, as a 

.sfb

 file. This 

.sfb

 file can be transferred over the 

Ymodem protocol for installation by SBSFU.

•

The 

.bin

 file that can be flashed for the test of UserApp (

SBFU_UserApp.bin

).

The batch files integrating the tool in the IDE are located in folder 

 

Applications\2_Images\2_Images SECoreBin\EWARM

:

•

prebuild.bat

: invoking the tool to perform the pre-build actions when compiling the 

SECoreBin

 project

•

postbuild.bat

: invoking the tool to perform the post-build actions when compiling the 

UserApp

 project

These batch files allow seamless switching from the Windows

® 

executable variant to the 

Python™ script variant of the 

prepareimage

 tool. The procedure is described in the files 

themselves.

E.5 Partial 

Image

A partial image contains only the binary portion of the new firmware image to install, versus 
the active firmware image.

Partial-image usage presents various benefits:

•

Smaller firmware image to download (reduced download duration)

•

Faster firmware image installation

•

Memory mapping optimization, with possibly smaller Slot #1 (maximum size of partial 
image) and bigger Slot #0 (maximum size of full image)

This feature is available on dual-image variant only (not available on single-image variant).

For the partial-image feature, the header structure includes two instances of the FW tag:

•

Partial FW tag: tag of the partial image only. This tag is checked by SBSFU during the 
image installation phase.

•

FW tag: tag of the full image (after the installation of the partial image). This tag is 
checked by SBSFU during the image boot phase.

The 

prepareimage

 tool can be used to generate partial firmware image, starting from the 

active image and the new firmware image to install:
1.

First perform a binary comparison between the two full images in clear

2.  Then apply the usual image preparation procedure

Refer to the detailed procedure 

Example for partial update

 described in the 

readme.txt file 

of 

the 

prepareimage

 tool 

(

Middlewares\ST\STM32_Secure_Engine\Utilities\KeysAndImages\readme.txt

).

Summary of Contents for X-CUBE-SBSFU































































































Reviews:

No comments