Firmware Upgrade
STV674/502V-R01
17/20
7
Firmware
Upgrade
The STV0674 Flash Drive may easily be upgraded with new firmware. Each firmware update is
distributed as a PC executable file which may be downloaded from a website and requires no other
installation than the standard webcam driver.
Simply run the executable and follow the onscreen instructions. The following points should be
noted for ease of use:
●
Start with no devices plugged in to the PC when you run the EXE (otherwise you will be
prompted to remove them)
●
Only plug one device into the PC at a time.
●
It is recommended that the device be plugged directly into the PC’s inbuilt USB ports. Avoid
using a hub during firmware upgrade.
●
After upgrade, it is recommended that the device be reformatted using the UI ‘format’ option.
●
If using a customised version of firmware that does not support format from the UI then format
the drive from Windows. After format, unplug without copying any files to the drive and power
up in untethered mode once before continuing operation (the drive is reformatted when
powered up for the first time when empty).
