Step 7.
Reset the application to restart by pressing the [
RESET
] button.
Figure 85.
RESET button
When performing KNX-RF communication, ETS tool monitors all KNX activity in the system as shown
in the Group Monitor panel.
Figure 86.
ETS monitoring activity
Figure 87.
ETS log analysis
Thanks to group monitor configuration
all commands/info are visible in the ETS tool
On/off commands
Dimming commands
RGB commands
4.1.8
ETS evaluation with STM32L0 devices
To start ETS evaluation with
devices, you have to install and initialize your devices in the KNX system
through the ETS tool.
The configuration download has to be done from already built ETS projects.
UM2920
ETS5 setup through Tapko RF/TP coupler
UM2920
-
Rev 1
page 47/71
