ST STM8L1528-EVAL, User Manual, Page: 4 / 23

User interface UM1000
4/23 Doc ID 17964 Rev 1
2.3 Navigating menus and submenus
To navigate the menus and submenus, perform the following actions as required:
RIGHT : Navigates to the next menu or submenu items on the right.
LEFT : Navigates to the next menu or submenu items on the left.
SEL : Enters submenu.
UP : Exits from a submenu.
2.4 STM8L1528-EVAL board jumper configuration
To be able to run the STM8L1528-EVAL demo correctly, configure the following
STM8L1528-EVAL board jumpers as follows:
● JP1: not fitted
●
JP2: fitted in SWIM position
● JP3: Audio DAC1: fitted
●
JP4: fitted in IDD position
● JP5: not fitted
●
JP6: fitted
● JP7: not fitted
●
JP8: not fitted
● JP9: fitted
●
JP10: fitted
● JP11 and JP12: are fitted in RS232 position
www.BDTIC.com/ST