Introduction
The
Evaluation board is designed as a complete demonstration and development platform for the
STMicroelectronics Arm
®
Cortex
®
-M33 core
‑
based microcontroller with Arm
®
TrustZone
®
and the Armv8-M mainline security
extension.
The STM32U575I-EV Evaluation board is based on an ultra-low-power
microcontroller with 2 Mbytes of
Flash memory and 786 Kbytes of SRAM, one external memory interface supporting an LCD interface, two Octo
‑
SPI memory
interfaces, one USB Type-C
®
2.0 FS device and host with Power Delivery controller interface (UCPD) compliant with USB Type-
C
®
r1.2 and USB PD specification r3.0, one camera interface, one SDMMC interface, one 14-bit and one 12-bit ADCs, two
12-bit DACs, two operational amplifiers, two ultra
‑
low
‑
power comparators, four digital filters for sigma
‑
delta modulation, up to 16
timers, touchkey capability, and SWD, JTAG, and ETM interface debugging support.
The full range of hardware features on the STM32U575I-EV Evaluation board helps the user to develop applications and
evaluate all the peripherals, such as USB Type-C
®
connector with USB PD, motor control connector, CAN FD transceiver, USB
2.0 FS, RS-232, audio DAC, microphone ADC, dot-matrix TFT LCD, IrDA, IR LED, IR receiver, LDR, SRAM, camera interface,
Octo
‑
SPI Flash memory, microSD
™
card, sigma-delta modulators, smartcard slot, I
2
C, and EEPROM.
The daughterboard and extension connectors provide an easy way to connect a daughterboard or wrapping board for the user's
specific application.
Furthermore, the onboard STLINK-V3E debugger provides out
‑
of
‑
the
‑
box loading and debugging capabilities, as well as a USB
Virtual COM port bridge.
Figure 1.
STM32U575I-EV Evaluation board (top view)
Figure 2.
STM32U575I-EV Evaluation board (bottom view)
Pictures are not contractual.
Evaluation board with STM32U575AI MCU
STM32U575I-EV
User manual
UM2854
-
Rev 1
-
September 2021
For further information contact your local STMicroelectronics sales office.