1
Features
•
STM32H747XIH6 and STM32H757XIH6 microcontrollers with 2 Mbytes of Flash memory and 1 Mbyte of
RAM in T25 package
•
4” 480×800 TFT color LCD with MIPI DSI
SM
interface and capacitive touchpanel
•
Ethernet compliant with IEEE-802.3-2002
•
USB OTG_HS and OTG_FS
•
I
2
C compatible serial interface
•
RTC with rechargeable backup battery
•
SAI audio DAC
•
ST-MEMS digital microphones
•
8-Gbyte (or more) SDIO3.0 interface microSD™ card
•
8 M×32bit SDRAM, 1 M×16bit SRAM and 8 M×16bit NOR Flash memory
•
1-Gbit Twin Quad-SPI NOR Flash memory or two 512-Mbit Quad-SPI NOR Flash memories
•
Potentiometer
•
4 color user LEDs
•
Reset, wakeup, tamper or key buttons
•
Joystick with 4-direction control and selector
•
Board connectors
–
Power jack
–
3 USB interfaces with Micro-AB connector
–
RS-232 communications
–
Ethernet RJ45
–
FDCAN compliant connection
–
Stereo headset jack including analog microphone input
–
2 audio jacks for external speakers
–
microSD™ card
–
JTAG/SWD and ETM trace
–
Extension connectors and memory connectors for daughterboard or wire-wrap board
•
Flexible power-supply options: ST-LINK USB V
BUS
or external sources
•
On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
•
Comprehensive free software libraries and examples available with the STM32Cube MCU Package
•
Support of a wide choice of Integrated Development Environments (IDEs) including IAR
™
, Keil
®
, GCC-
based IDEs
Note:
Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2525
Features
UM2525
-
Rev 3
page 2/69
