Features
UM1932
6/31
UM1932 Rev 4
1 Features
•
STM32F469NIH6 microcontroller, based on the Arm
®(a)
Cortex
®
-M4 processor, with
2 Mbytes of flash memory and 324 Kbytes of RAM, in a BGA216 package
•
4” RGB 800×480 pixel TFT color LCD with MIPI DSI
®
interface and capacitive touch
panel
•
USB OTG FS
•
SAI audio DAC
•
3 ST-MEMS digital microphones
•
128-Mbit Quad-SPI NOR flash memory
•
4 M×32bit SDRAM
•
Reset and wake-up push-buttons
•
4 color user LEDs
•
Board connectors:
–
microSD™ card
–
USB with Micro-AB
–
Stereo headphone output jack
–
I
2
C expansion
–
ARDUINO
®
Uno V3 expansion
–
2.54 mm pitch expansion
•
Flexible power-supply options: ST-LINK USB V
BUS
, USB connector, or external
sources
•
Comprehensive free software libraries and examples available with the STM32Cube
MCU Package
•
On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability:
mass storage, Virtual COM port, and debug port
•
Support of a wide choice of Integrated Development Environments (IDEs) including
IAR Embedded Workbench
®
, MDK-ARM, and STM32CubeIDE
a. Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
