May 2021
UM1667 Rev 3
1/59
1
UM1667
User manual
STM32429I-EVAL evaluation board for STM32F429 MCUs
Introduction
The STM32429I-EVAL evaluation board is a complete demonstration and development
platform for STMicroelectronics Arm
®
Cortex
®
-M4 core-based STM32F429NIH6
microcontrollers. It features three I
2
C, six SPI with two muxed full-duplex I
2
S, SDIO, four
USART, four UART, two CAN, three 12-bit ADC, two 12-bit DAC, one SAI, 8- to 14-bit digital
camera module interface, internal 256+4 Kbyte SRAM and 2-Mbyte Flash memory, USB HS
OTG and USB FS OTG, Ethernet MAC, FMC interface, JTAG debugging support. This
evaluation board can be used as a reference design for user application development but it
is not considered as a final application.
The full range of hardware features on the board helps the user to evaluate all peripherals
(such as USB OTG HS, USB OTG FS, Ethernet, motor control, CAN, microSD™ card,
USART, Audio DAC and ADC, digital microphone, IrDA, CAN, RF-EEPROM, SRAM, NOR
Flash memory, SDRAM, 4.3" TFT LCD with a resistive touch panel, and others) and develop
his own applications. Extension headers make it possible to easily connect a daughterboard
for specific applications development.
The integrated ST-LINK/V2 provides an embedded in-circuit debugger and programmer for
the STM32 MCU.
Figure 1. STM32429I-EVAL evaluation board
Picture is not contractual.
www.st.com
Downloaded from